Feline Coronavirus (FCoV) Antigen Rapid Test Kit
$6.99
✅ Accurate results in 15 minutes – Detect feline coronavirus (FCoV) antigen with 98% clinical specificity.
✅ User-friendly workflow – No specialized equipment required; ideal for point-of-care testing.
✅ Extended shelf life – 24-month stability at 4–30°C, ensuring cost-effective inventory management.
✅ Compliance assured – Manufactured under ISO 13485 standards with validated performance data.
Quantity
【Contents】
1) Test Cassette: 1 cassette/pouch (×1);
2) Diluent: 1.0 mL/vial (×1);
3) Cotton Swab: 1 swab;
4) Dropper: 1 dropper;
5) Instructions for Use: 1 copy.
【Intended Use】
For the qualitative detection of Feline Coronavirus (FCoV) antigen in feline fecal specimens using Colloidal Gold-based Lateral Flow Immunoassay.
【Test Principle】
This test kit is based on the principle of Colloidal Gold-based Lateral Flow Immunoassay. Samples of feline fecal are collected using a cotton swab. The diluted sample then moves forward on the nitrocellulose membrane under capillary action. When FCoV antigen is present in the sample, it binds to the colloidal gold-labeled antibodies conjugated to the test line. The formed immune complex migrates to the test line on the nitrocellulose membrane, where it is recognized and bound by the coated antibodies, forming a purple-red test line, indicating a positive result for feline coronavirus antigen. If the test line does not develop color, the result is negative. Additionally, the nitrocellulose membrane is coated with anti-chicken IgY antibody as a control line, serving as an indication of normal chromatography process.
【Instructions for Use】
Please read the operation steps and precautions carefully before use. Prior to the test, allow the unopened test strips and samples to reach room temperature (15–30℃).
1. Sample Collection: Use the designated cotton swab to collect an appropriate amount of fresh fecal sample.
2. Immerse the swab into the diluent tube, rotate for 10 seconds, and let stand for 1 minute. The supernatant will be used as the test solution. Discard the swab after use.
3. Open the test cassette and place it on a flat surface.
4. Use the dropper to apply 4 drops of the test solution into the sample well, then start the timer.
5. Results must be read between 10 and 15 minutes after sample application. Do not interpret results after 15 minutes.
